The annular BS10C offers a compact, high-performance, new solution for ‘on-site’ and maintenance hose repairs independent of a power supply and at only 18kg, it can be carried literally anywhere you need to go. With the capacity to assemble microbore through to -10 (DN16) 2SN hoses, the BS10C is suitable for maintenance, workshop, mobile or breakdown /standby use and is naturally built to the usual high standards you have come to expect from Banner.
The BS10C is supplied as standard with a basic range of 3 sets of quick to fit die sets – 16, 20 and 23mm – allowing assembly of spiral hoses from -04 (DN6) to -10 (DN16). All dies come in a purpose built plastic toolbox with the machine. Extra Dies 6, 8, 10, 12, 14, 18 and 26mm for microbore and intermediate hose assembly are also available. Cluster quick change dies are also available with this machine.
Machine setting and adjustment is simple. The swage size setting is achieved by adjusting the direct reading micrometer type gauge. Select and fit the appropriate dies, set the machine gauge to the required finished diameter and then operate the cam pump with
rechargeable drill or mains drill if required until the gauge setting is reached.
Code
Swage Range
Length (MM)
16
16-20
50
20
20-23
50
23
23-26
50
Code
Swage Range
Length (MM)
6
6-8
50
8
8-10
50
10
10-12
50
12
12-14
50
14
14-16
50
18
18-20
50
26
26-29
50
Capacity
-10 (DN16) 2SN
Actuator
Single acting spring return 50 tonne ram
Pump
Integral 1 speed cam pump with rechargeable drill 2500 rpm (not included)
Standard Dies
16, 20 and 23mm
Extra Dies
6, 8, 10, 12, 14, 18 and 26mm
General
Maximum die length = 50mm Maximum swage diameter = 34mm Max opening over die = die + 20mm Die holder throat (open) = 55mm
Crated Details
36 x 38 x 30cm(h) Gross weight 20kg
Looking for more information, technical specifications or a quotation? Our experienced team is here to help you find the right swaging machine for your requirements.
Simply complete the form and we’ll be in touch to discuss your enquiry.