The annular BS10B/VM, with the capacity to assemble from microbore through to -10 (DN16) 2SN hydraulic hose is suitable for maintenance, workshop, mobile or breakdown/ standby use and is naturally built to the usual high standards you have come to expect from Banner.
The BS10B/VM is supplied as standard with a basic 3 sets of quick to fit die sets – 16, 20 and 23mm – allowing assembly of spiral hoses from -04 (DN6) to -10 (DN16). All dies come in a purpose built plastic toolbox with the machine. Extra Dies 6, 8, 10, 12, 14, 18 and 26mm for microbore and intermediate hose assembly are also available. You can have cluster quick change dies as well with this machine.
Machine setting and adjustment is simple. Select and fit the appropriate dies, set the micrometer machine gauge to the required finished diameter and operate the power pack. The machine will auto stop at the pre-set size set on gauge.
16
16-20
50
20
20-23
50
23
23-26
50
6
6-8
50
8
8-10
50
10
10-12
50
12
12-14
50
14
14-16
50
18
18-20
50
26
26-29
50
-10 (DN16) 2SN
Single acting spring return 50 tonne ram
12v. 1ph and Air/Oil options
16, 20 and 23mm
6, 8, 10, 12, 14, 18 and 26mm
Maximum die length = 50mm Maximum swage diameter = 34mm Max opening over die = die + 20mm Die holder throat (open) = 55mm
62 x 42 x 36cm(h) Gross weight 35kg
