The new tabletop BS24–40 is probably the most cost effective answer for your maintenance and distributor swaging machine requirements around today.
The ‘snap in’ radially closing dies provide over 30mm clearance when the machine dies are fully open, allowing access for most bent 90 deg fittings.
Extra dies are available to increase the swaging capacity, allowing the assembly of smaller bore and at the other end of the scale -24 (DN38) and -32 (DN51) wire braid hose assemblies. All dies come in a purpose built steel toolbox with the machine.
The push button controls include an automatic ‘stop at size’ facility.
The direct reading micrometer type gauge allows rapid setting of the powerful 80 tonne, double acting, fully enclosed ram that is capable of providing over 300 tonnes when expressed as radial effort on the dies.
To reduce maintenance downtime to a minimum, all the modular ‘plug in’ components including the setting gauge, hydraulic control valve and related solenoids, can be removed for servicing purposes and replaced in minutes.
Optional Cluster quick change tooling is available, as well as our Digital control unit.
16
16-20
55
20
20-23
55
23
23-26
55
29
29-34
80
39
39-45
80
45
45-51
80
51
51-57
80
6
6-8
55
8
8-10
55
10
10-12
55
12
12-14
55
14
14-16
55
26
26-29
55
34
34-39
80
57
57-63
80
63
63-69
80
-20 (DN31) 4SP, -24 (DN38) R2, -32 (DN51) R1
Double acting annular cylinder. Piston force of 80 tonnes provides over 300 tonnes compression when expressed as radial tonnage.
Easy to set direct reading micrometer dial Auto stop at set size.
Push button operation. Panel light indicates swage completion.
16, 19, 23, 29, 39, 45 and 51mm
6, 8, 10, 12, 14, 26, 34, 57 and 63mm
Maximum die length = 80mm
Maximum swage diameter = 69mm
Max opening over die = die + 30mm
Die holder throat (open) = 106mm
71 x 53 x 62cm(h)
Gross weight 250kg
90 x 60 x 86cm(h)
Gross weight 250kg