Banner BS10H Portable

  • Suitable from Microbone through to -10 4SP (DN16)
  • Ideal for maintenance and agricultural repairs
  • Lightweight at only 18Kg
  • Direct reading micrometer setting
  • 2-Speed handpumps fitted as standard
  • For use on a wide range of hose and fittings

The annular BS10H offers a compact, high performance, new solution to ‘on site’ and maintenance hose repairs independent of a power supply and at only 18kl can be carried literally anywhere you need to go. With the capacity to assemble microbore through to -10(DN16) 4SP hoses, the BS 10H is suitable for maintenance, workshop, mobile or breakdown /standby use and is naturally built to the usual high standards you have come to expect from Banner.

The BS 10H is supplied as standard with a basic range of 3 sets of quick to fit die sets – 14, 18 and 22mm – allowing assembly of spiral hoses from -04(DN6) to -10(DN16). Extra Dies 6, 8, 10, 12, 16 and 20mm for micro bore and intermediate hose assembly are also available.

Machine setting and adjustment are simplicity itself. Swage size setting is achieved by adjusting the direct reading micrometer type gauge. Select and fit the appropriate dies, set the machine gauge to the required finished diameter then operate the hand pump until the gauge setting is reached.

banner-bs10h
Code Swage Range Length (mm)
14 14-18 50
18 18-22 50
22 22-27 50
27 (Die Holder) 27-34 50
Code Swage Range Length (mm)
6 6-8 50
8 8-10 50
10 10-12 50
12 12-14 50
16 16-18 50
20 20-22 50
Capacity: -10 4SP (DN16)
Actuator: Single acting spring return 50 tonne ram
Pump: Integral 2 speed
Std Dies: 14, 18 and 22mm
Extra dies: 6, 8, 10, 12, 16 and 20mm
General: Max dies length Max swage dia Max Opening over die Die holder throat open = 50mm = 34mm + 20mm = 45mm
Shipping Spec: Crated wt 20k Crated size 40 x 30 x 25cm high
Translate