Banner BS16H

  • Assembles up to -16(DN20)4SP
  • A lightweight protable machine for workshop and maintenance use
  • Easy to set and use
  • For use on a wide range of hose and fittings

The annular BS 16H offers a compact, high performance hose assembly press that is suitable for maintenance, workshop, agricultural, mobile or breakdown standby use – built to the usual high standards that you have come to expect from Banner.

The BS 16H is supplied as standard with a range of 5 quick to fit die sets, 16, 20, 23, 29 and 35mm covering spiral hose assembly from -04 (DN6) to -16 (DN20).

Machine setting and adjustment are simplicity itself. Swage size setting is achieved by adjusting the direct reading micrometer type gauge. Select and fit the appropriate dies, set the machine to the required finished diameter then operate the hand pump until the gauge setting is reached

banner-bs16h
Code Swage Range Length (mm)
16-16 16-20 62
16-20 20-23 62
16-23 23-26 62
16-29 29-35 62
16-35 35-41 62
Code Swage Range Length (mm)
16-10 10-12 62
16-12 12-14 62
16-14 14-16 62
16-26 26-29 62
16-41 41-47 62
Capacity: -16 (DN16) 4SP
Actuator: Single acting spring return 70 tonne ram
Pump: Integral 2 speed
Std Dies: 16, 20, 23, 29 and 35mm
Extra dies: 10, 12, 14, 26 and 40mm
Flared one piece and special forms are available.
General: Max dies length Max swage dia Max Opening over die Die holder throat open = 62mm = 55mm = die + 24mm = 70mm
Shipping Spec: Crated wt 40kls Crated size 41 x 49 x 35cm
Translate